Electronic Ballast For 54-58W X 2 , Model - SD254-58
₹1,650 per Unit

Electronic Ballast For 54-58W X 2 , Model - SD254-58

Posted by : VIVEK PRADHAN
Posted on : 29-May-18

SD2xxx UNI

1-10V Universal dimmable linear ECG for 2 Fluorescent Lamps (Multiwatt)

Description

  • Warm start with automatic identification of lamp type
  • Automatic restart after lamp replacement
  • Constant light flux independent of mains fluctuations
  • Operating ambient temperature 0/+10 - +60°C

Protection:

  1. End of Life Protection
  2. Short & open circuit proof
  3. Auto shutdown in case of lamp failure
Min Order Qty
10 Nos
Product Origin
Germany
Product Condition
New
Guarantee/Warranty
No
Make/ Manufacturer
HEP
Stock
3750 Nos
CGST
9%
SGST
9%
IGST
18%

Specifications

Parameter ConditionsMinNomMaxUnit
Number Of lamps Driven 2-2-
Lamp Power25°C, Nominal input47x2-51x2W
Input PowerEE1=A1 BAT Class (CELMA)101.5-110.5W
Rated Input Voltage25°220230240V
AC Input Voltage Range25°180-300V
DC Input  Voltage Range25°160-300V
Input Frequency25°050-60-Hz
Input Current25°C, Nominal input0.45-0.49A
Power Factor25°C, Nominal input0.930.98--
Operating Frequency25°C, Nominal input40--KHz
Lamp Current Crest Factor25°C, Nominal input--1.6-
THD25°C, Nominal input--12%-
Ballast Lumen Factor 25°C, Nominal input0.890.951.02-
Starting Time 25°C, Nominal input--1S
Operating Ambient Temperature Nominal input0/10-+60degC
Max Allowed Case Temperature Minimum Input--+75degC
Dimming Range 25°C, Nominal input1%-100%-
Lamp Start At Dimming Position25°C, Nominal input1%-100%-
Average Service Lifeat 60 deg C ambient50,000--hours
Failure Rate Per 1000h Operationat 60 deg C ambient--20%-
End-of-Life Protection  Yes  
Automatic Shutdown In Case Of Lamp Failure   Yes  
Automatic Restart after lamp replacement  Yes  
Lamp Type T5 54W HO x 2    
 T8 58W x 2    
TC-L 55W(50W) x 2    
Application Space Indoor use (Low Humidity , No Condensation )    


Accessories


OR
Electronic Ballast For 54-58W X 2 , Model - SD254-58
PID: 87891
3750 Nos
₹ 1650 per Unit
10 Nos
per Unit
How It Works?
x
  1. Seller posts a slow-moving/Excess stock
  2. Buyer makes an offer against the stock. He can also choose to buy right there & then.
  3. Seller can then choose to accept or counter the offer. Buyer then makes the payment to Unstocker.
  4. Upon receiving the payment, unstocker send a PO to seller
  5. Seller then delivers the product to the buyer.
  6. If the buyer accepts the product, Unstocker transfers the money to the seller’s account.
  7. If the buyer rejects the product, Unstocker refunds the buyer’s money and send an request to seller for collecting product.